Original Cherry DB3C series High Quality Subminiature snap-action switches, with the highest accuracy/sensitivity!

If you want only the best in your pinball machine, these are the switches you have to use for rollovers, balltroughs etc.

No Actuator included, see below at related products to order the actuator to your needs.
Recommended: 57mm actuator, with this actuator you can modify the actuator your needs.

Features:
High switching accuracy
Switching action: changeover contact
Breaking capacity: 0.1 A/250 VAC (EN 61058), 0.1 A/125 VAC (UL 1054)
Contacts: AuAgPt (Crosspoint)
Leakage current resistance: PTI 175
Operating temperatures: –40 to +120 °C
Connections: CuZn, silver-plated
electrical useful life: 50000 switching cycles
Certifications: ENEC, UL, CSA.
The length of the raised auxiliary actuator is measured from the center of the mounting hole.
Switch actuating force: maximum 150 cN.
Action point: 8.4 mm (±0.3).
Pretravel: maximum 1.0 mm.
Overtravel: minimum 0.6 mm.
Travel difference: maximum 0.1 mm.
Home position: maximum 9.3 mm.